Water well drilling cost in North Texas depends on depth, geology, casing, pump system, pressure tank, water testing, permits, access, drilling rig setup, and whether the property needs a residential, irrigation, or livestock well.
Texas well drilling guides show residential wells often around $9,000 to $20,000 for depths of roughly 160 to 600 feet, while other Texas data shows $22 to $65 per foot depending on region and geology.
Need help finding a local quote?
If you need help with water well drilling, new residential well, acreage water supply, or private well planning in Dallas-Fort Worth or nearby North Texas areas, contact Trealtorr and tell us what is going on. Photos help a lot.
Text WELL DRILLING to +1 (347) 831-6085 or use the Trealtorr contact form.
Trealtorr is not the contractor. We help DFW homeowners understand the project and connect with local service options when available.
Quick price guide
| Service type | Planning range | What changes it |
|---|---|---|
| Texas residential well | $9,000–$20,000 | Depth, geology, casing, pump system |
| Per-foot drilling benchmark | $22–$65 per foot | Region, depth, formation |
| Average Texas well data | $8,550 around 225 ft | One 2026 benchmark |
| Deep/difficult well | $20,000–$40,000+ possible | Depth, hard rock, low yield, casing |
| Water testing/treatment | $100–$1,500+ possible | Testing, filtration, softener if needed |
What changes the price?
- Well depth
- Geology and water table
- Casing length
- Pump and pressure tank
- Water quality
- Access for drilling rig
- Permits and reporting
North Texas local note
Water wells are more relevant on acreage outside city water areas. In North Texas, depth and geology vary a lot, so neighboring well data can help but does not guarantee your cost or yield.
When this service makes sense
- Acreage without city water
- Irrigation water
- Livestock or barn water
- Backup water planning
- New rural build
Red flags before hiring
- They quote only per foot and ignore pump system.
- No discussion of water quality testing.
- Permits/reporting are unclear.
- They guarantee water without explaining risk.
- Access for rig is not checked.
What to send before requesting a quote
Good photos, measurements, and access details make the quote conversation faster and reduce back-and-forth.
- Property address/county.
- Lot map if available.
- Tell us residential, irrigation, livestock, or backup use.
- Mention nearby wells if you know them.
Questions to ask before hiring
- What is included beyond drilling?
- Is pump/pressure tank included?
- How deep are nearby wells?
- Is water testing included?
- What happens if yield is low?
- What permits/reports are needed?
FAQ
How much does water well drilling cost in North Texas?
Texas residential wells are often around $9,000 to $20,000, with per-foot drilling commonly discussed around $22 to $65 per foot.
Is the pump included in well drilling?
Not always. Ask whether the quote includes drilling, casing, pump, pressure tank, electrical, and testing.
Can a driller guarantee water?
Usually no. They can use local data, but depth and yield are not guaranteed until drilling.
What should I text first?
Text WELL DRILLING with property county and intended water use.
Need help finding a local quote?
If you need help with water well drilling, new residential well, acreage water supply, or private well planning in Dallas-Fort Worth or nearby North Texas areas, contact Trealtorr and tell us what is going on. Photos help a lot.
Text WELL DRILLING to +1 (347) 831-6085 or use the Trealtorr contact form.
Trealtorr is not the contractor. We help DFW homeowners understand the project and connect with local service options when available.