Sprinkler System Installation Cost in Dallas-Fort Worth

Sprinkler system installation cost in Dallas-Fort Worth depends on yard size, number of zones, trenching, water pressure, controller type, backflow requirements, landscaping, and whether the system is for new sod, existing lawn, or full yard renovation.

Current Dallas sprinkler installation data shows $0.50 to $2.00 per square foot, labor around $50 to $150 per hour, and underground trenching around $4 to $12 per linear foot.

Need help finding a local quote?

If you need help with sprinkler system installation, full-yard irrigation, smart controller setup, or new lawn watering system in Dallas-Fort Worth, contact Trealtorr and tell us what is going on. Photos help a lot.

Text SPRINKLER INSTALL to +1 (347) 831-6085 or use the Trealtorr contact form.

Trealtorr is not the contractor. We help DFW homeowners understand the project and connect with local service options when available.

Quick price guide

Project type Planning range What changes it
Basic lawn sprinkler install $0.50–$2.00 per sq ft Dallas planning range
Small front yard system $2,000–$4,500+ possible Zones, trenching, controller
Full-yard irrigation $4,500–$10,000+ possible Front/back yard, zones, valves
Trenching $4–$12 per linear foot Soil, roots, hardscape, depth
Smart controller upgrade $300–$1,000+ possible Controller, wiring, setup

What changes the price?

  • Yard square footage
  • Number of zones
  • Water pressure and meter
  • Trenching and roots
  • Backflow and permits
  • Smart controller
  • New sod or landscape areas

DFW local note

Sprinklers can help DFW lawns survive heat, but bad design can waste water or cause foundation moisture problems. Good zoning matters because sunny areas and shaded areas need different watering.

When this project makes sense

  • New sod
  • Dry lawn
  • Backyard renovation
  • Rental curb appeal
  • Smart watering upgrade

Red flags before hiring

  • No zone map.
  • They ignore water pressure.
  • No backflow/permit discussion.
  • They trench without checking utilities.
  • They do not explain head coverage.

What to send before requesting a quote

Good photos and a few details make the quote conversation faster and reduce back-and-forth.

  • Photos of front and back yard.
  • Approximate yard size.
  • Tell us new sod, existing lawn, or landscape beds.
  • Mention low water pressure, trees, slopes, or foundation concerns.

Questions to ask before hiring

  • How many zones are included?
  • Is backflow included?
  • Is a smart controller included?
  • Will utilities be marked?
  • Is trench repair included?
  • How is coverage tested?

FAQ

How much does sprinkler installation cost in Dallas?

Current Dallas data shows about $0.50 to $2 per square foot, with trenching and zones affecting the total.

Is a smart controller worth it?

Often yes in DFW because weather-based watering can help reduce waste.

Can sprinklers hurt a foundation?

Uneven watering can contribute to moisture imbalance, so layout and scheduling matter.

What should I text first?

Text SPRINKLER INSTALL with yard photos and approximate size.

Need help finding a local quote?

If you need help with sprinkler system installation, full-yard irrigation, smart controller setup, or new lawn watering system in Dallas-Fort Worth, contact Trealtorr and tell us what is going on. Photos help a lot.

Text SPRINKLER INSTALL to +1 (347) 831-6085 or use the Trealtorr contact form.

Trealtorr is not the contractor. We help DFW homeowners understand the project and connect with local service options when available.