Over-the-range microwave installation cost in Dallas-Fort Worth depends on microwave size, cabinet fit, wall bracket, electrical outlet, venting, old microwave removal, tile backsplash, and whether it vents outside or recirculates.
For planning, over-the-range microwaves often cost $150 to $600 for the unit, and total cost with installation can run about $250 to $1,200. Local appliance installation services in Dallas often range around $75 to $300 for simpler installs.
Need help finding a local quote?
If you need help with over-the-range microwave installation, microwave replacement, vent hookup, or kitchen appliance install in Dallas-Fort Worth, contact Trealtorr and tell us what is going on. Photos help a lot.
Text MICROWAVE to +1 (347) 831-6085 or use the Trealtorr contact form.
Trealtorr is not the contractor. We help DFW homeowners understand the project and connect with local service options when available.
Quick price guide
| Project type | Planning range | What changes it |
|---|---|---|
| Simple microwave replacement | $150–$400+ labor/appliance setup possible | Same size, existing outlet/bracket |
| Dallas appliance install service | $75–$300 typical local service range | Basic appliance installation |
| OTR microwave total with install | $250–$1,200 | Unit, bracket, labor, venting |
| Exterior vent hookup | $300–$1,500+ possible | Ductwork, cabinet/wall work |
| Cabinet/electrical modification | $200–$1,000+ possible | Outlet, cabinet fit, backsplash |
What changes the price?
- Microwave width and height
- Cabinet clearance
- Existing outlet
- Venting type
- Old unit removal
- Wall bracket and studs
- Backsplash/cabinet modifications
DFW local note
This is a common Dallas kitchen update before listing or after appliance failure. If you cook a lot, compare a microwave vent to a true range hood because ventilation performance is not the same.
When this project makes sense
- Old microwave failed
- Kitchen appliance refresh
- Pre-listing update
- Replace yellowed/outdated unit
- Add vented cooking area
Red flags before hiring
- They do not check cabinet clearance.
- Vent direction is unclear.
- Outlet location is ignored.
- Old microwave haul-away is unclear.
- They do not secure the wall bracket properly.
What to send before requesting a quote
Good photos and a few details make the quote conversation faster and reduce back-and-forth.
- Photo of current microwave/range area.
- Photo inside cabinet above microwave.
- Microwave model if already bought.
- Tell us recirculating or exterior vent if known.
Questions to ask before hiring
- Is old microwave removal included?
- Is haul-away included?
- Is venting included?
- Is electrical included?
- Will it fit the cabinet opening?
- Is the bracket included?
FAQ
How much does OTR microwave installation cost?
Total cost with unit and install can run about $250 to $1,200 depending on unit, venting, and cabinet/electrical needs.
Can it vent outside?
Sometimes, if ductwork exists or can be added. Otherwise it may recirculate.
Is a microwave vent as good as a range hood?
Usually not. Serious cooking may benefit from a dedicated range hood.
What should I text first?
Text MICROWAVE with photos of the range/microwave area.
Need help finding a local quote?
If you need help with over-the-range microwave installation, microwave replacement, vent hookup, or kitchen appliance install in Dallas-Fort Worth, contact Trealtorr and tell us what is going on. Photos help a lot.
Text MICROWAVE to +1 (347) 831-6085 or use the Trealtorr contact form.
Trealtorr is not the contractor. We help DFW homeowners understand the project and connect with local service options when available.