Hardwood floor refinishing cost in Dallas-Fort Worth depends on square footage, wood condition, sanding depth, stain choice, finish type, furniture moving, repairs, stairs, and whether you choose standard or dustless refinishing.
Dallas hardwood refinishing is commonly shown around $3 to $8 per square foot, while one Dallas cost guide shows typical completed projects around the mid-$3,000s depending on size.
Need help finding a local quote?
If you need help with hardwood floor refinishing, sanding, staining, or floor repair in Dallas-Fort Worth, contact Trealtorr and tell us what is going on. Photos help a lot.
Text HARDWOOD to +1 (347) 831-6085 or use the Trealtorr contact form.
Trealtorr is not the contractor. We help DFW homeowners understand the project and connect with local service options when available.
Quick price guide
| Project type | Planning range | What changes it |
|---|---|---|
| Small room refinishing | $600–$1,500+ possible | Square footage and condition |
| Dallas per-square-foot range | $3–$8 per sq ft | Sanding, stain, finish, labor |
| Typical Dallas project | $3,500–$3,700 possible | One local cost guide range |
| Stairs refinishing | $40–$100+ per step possible | More labor and detail work |
| Repairs before refinishing | Often separate | Boards, pet stains, water damage, gaps |
What changes the price?
- Square footage
- Wood species and current condition
- Deep scratches, pet stains, or water damage
- Natural finish vs stain
- Oil-based vs water-based finish
- Dustless system
- Furniture moving and temporary relocation
DFW local note
Refinishing existing hardwood can be a smart DFW upgrade because it can restore old floors without replacing them. It is especially useful in older Dallas homes and homes being prepared for resale.
When this project makes sense
- Before listing a home
- After tenants or pets
- Remove scratches and dull finish
- Change stain color
- Restore older hardwood instead of replacing
Red flags before hiring
- They do not inspect for engineered vs solid hardwood.
- They promise refinishing thin veneer floors.
- They do not explain dust control.
- They do not provide finish options.
- They ignore pet stains or water damage.
What to send before requesting a quote
Good photos and a few details make the quote conversation faster and reduce back-and-forth.
- Photos of the floor from several angles.
- Close photos of scratches, stains, gaps, or water damage.
- Approximate square footage.
- Tell us if you want same color, darker stain, lighter stain, or natural.
Questions to ask before hiring
- Can this floor be refinished or is it too thin?
- Is dustless sanding included?
- How many finish coats are included?
- Is furniture moving included?
- How long before walking on the floor?
- Are repairs included?
FAQ
How much does hardwood refinishing cost in Dallas?
A common Dallas range is about $3 to $8 per square foot, but damage, stain, finish, stairs, and furniture moving can change the price.
Is refinishing cheaper than replacement?
Usually yes if the existing hardwood is thick enough and not badly damaged.
Can engineered wood be refinished?
Sometimes, but only if the wear layer is thick enough.
What should I text first?
Text HARDWOOD with floor photos and approximate square footage.
Need help finding a local quote?
If you need help with hardwood floor refinishing, sanding, staining, or floor repair in Dallas-Fort Worth, contact Trealtorr and tell us what is going on. Photos help a lot.
Text HARDWOOD to +1 (347) 831-6085 or use the Trealtorr contact form.
Trealtorr is not the contractor. We help DFW homeowners understand the project and connect with local service options when available.